simple site creator
Mobirise

Navigating the options
for underfloor heating

By Carl Stokes, Head of Marketing, Schlüter-Systems Ltd.

Popular demand for underfloor heating has sky-rocketed in recent years and this trend looks set to continue exponentially. In-line with its emphasis on education, Schlüter-Systems looks to provide specifiers with everything they need to make an informed decision.

Tile and stone are great partners to underfloor heating, due to their high thermal conductivity and good heat retention credentials. These properties make for a quick warm-up and more efficient use of energy; benefits which are easy to grasp. But awareness of the system that lies beneath the surface has to be built on two levels: a general comprehension of the benefits of locating a heating system under the floor; and an understanding of the technologies that are available to execute the project.

Whereas in the past, the specification of underfloor heating meant large build-ups and extensive curing times, in the present this is no longer necessary. Schlüter-Systems offers electric and hydronic systems that make the most of modern technology, to the benefit of parties across the construction chain.

Mobirise

Hassle-free electric underfloor heating
The award winning Schlüter®-DITRA-HEAT-E system makes the installation of electric underfloor heating simpler and easier than ever before. The system’s heating cables are designed to clip securely into its studded uncoupling mat, saving installation steps and height, and ensuring even spacing and therefore a consistent heating experience. In addition, its low assembly height makes it ideally suited for most environments and it can be installed over the majority of substrates.

Schlüter®-DITRA-HEAT-E offers optimum freedom for creating heating zones exactly where they’re needed and can also be used for walls, opening up a whole new world of possibilities for the creation of heated features.

Crack-free installations with uncoupling properties
All materials expand and contract with temperature changes, with tile and stone doing so at a different rate to the substrate upon which they are installed. Direct adhesion of the tile or stone covering to the substrate means that the two layers will be rigidly bound together, meaning that movement and stress cracks in the substrate will transfer through to and damage the layer above.

Mobirise

This phenomenon can be prevented with movement joints and uncoupling membranes, the combination of which relieves stresses and allows for movement.

With many electric underfloor heating systems, an uncoupling membrane would have to be installed as an additional layer, but the matting of Schlüter®-DITRA-HEAT-E provides the necessary uncoupling capability, as well as a host of other features.

Schlüter®-DITRA-HEAT is part of the Schlüter®-DITRA family of mattings that feature uncoupling, crack-bridging, vapour management, load distribution, waterproofing and sound-reduction properties. Together, these features relieve stresses that occur between the substrate and covering to manage movement and prevent cracking and debonding of the covering.

Thermal breaking and impact sound reduction
The latest development for the Schlüter®-DITRA-HEAT-E system is that it can now be specified with Schlüter®-DITRA-HEAT-DUO matting, which boasts the additional features of an integrated thermal break and impact sound reduction of up to 13dB.

Mobirise

These two additional features are achieved thanks to a 2mm fleece layer on the underside of the uncoupling membrane, which allows 80% of the heat to rise to the surface during the heat-up phase for up to 70% faster response time, as well as reducing impact sound by a perceived 50%.

A thermal break is an element within an assembly which reduces the flow of thermal energy between conductive materials. The thermal break in Schlüter®-DITRA-HEAT-DUO ensures that the heat doesn’t get lost, but is instead transferred directly to the floor covering above.

This unique combination of fleece and matting allows an input of 136 W/m2, to push up to 110 W/m2 to the surface, reacting faster than 200 W/m2 systems and making Schlüter®-DITRA-HEAT-E-DUO cost less to run compared to other systems, which lose 50% of their heat into the subfloor below.

Reducing layers and height within a heated floor assembly
As the system incorporates both uncoupling and underfloor heating, fewer layers are required in the flooring assembly. A traditional system can require numerous products, including insulation board, underfloor heating mat, uncoupling membrane and encapsulation layers; all of which add height to an installation.

Mobirise

By contrast, the whole Schlüter®-DITRA-HEAT-E-DUO system comes in at only 7.5mm in height, making it suitable for both new-build and renovation projects and saving considerable build-up within a heated flooring assembly. Where an even lower height is needed, the Schlüter®-DITRA-HEAT-E range can offer solutions starting from just 5.5mm.

CE Marked waterproofing
In addition to offering all of the aforementioned benefits, the Schlüter®-DITRA-HEAT-E system can function as a bonded waterproofing assembly, simply by sealing the matting joints with Schlüter®-KERDI-KEBA sealing band and Schlüter®-KERDI-COLL sealing adhesive.

Under-wall heating not only offers CE Marked waterproofing for walls and a great source of heat but it is also a safer alternative to a towel rail or radiator, particularly for children and the elderly. Under-wall heating from Schlüter-Systems is a unique solution that is very easy to install and allows radiated heating underneath the tile or stone covering, thus keeping the system protected and away from harm.

Naturally, the use of Schlüter®-DITRA-HEAT-E is not limited to kitchens and bathrooms; floor and wall heating enhances living, dining, and working spaces too.

Environmentally-friendly hydronic heating system
An alternative to installing an electric system is to use a wet (or hydronic) system to provide an in-screed heating solution. The Schlüter®-BEKOTEC-THERM system takes an integrated approach to the installation of underfloor heating, providing solutions to many of the problems associated with traditional underfloor heating installations.

Mobirise

The system offers many advantages to both the specifier and installer, including removing the need for screed movement joints, which allows for more control over the design of the surface covering. The considerably lower installation height of the Schlüter®-BEKOTEC-THERM underfloor heating system, coupled with the unique design of the Schlüter®-BEKOTEC modular screed panel, means less screed is needed; making it easier, quicker and cheaper to install and run.

Rapid response and an even heating experience
Another notable benefit of the requirement for less screed is that the heating pipes are located closer to the surface. As a result, the underfloor heating system can be run at considerably lower temperatures and still achieve the same heating results. A low supply temperature of approximately 30°C, compared to between 50 to 55°C in some traditional systems, means Schlüter®-BEKOTEC-THERM is also extremely effective both with conventional heat generation devices and regenerative energy sources.

The ability to run at lower temperatures makes the Schlüter®-BEKOTEC-THERM underfloor heating system suitable for use with heat pumps, as well as other environmentally-friendly energy sources that work more efficiently at lower temperatures, making it a green choice with economical, energy saving properties.

The modular screed panels of the system are designed to hold the heating pipes in place at regular and exacting intervals, resulting in a more even heating experience than you would get with either radiators or traditional underfloor heating systems.

Mobirise

The Schlüter®-BEKOTEC-THERM system also features a range of control modules and room sensors, adding flexibility and convenience to the regulation of room temperature. The core of the system can be connected to a timer module for energy-saving temperature reduction and the connection modules for wired or wireless room sensors can be freely combined with the base module, which enables the flexible expansion of existing systems at any time. Modern wireless and wired room sensors allow for individual room temperature control to suit requirements. The Schlüter®-BEKOTEC-THERM system can also be integrated with Building Management Systems (BMS).

Construction and time-saving benefits
Since a thinner screed requires much less material, the final Schlüter®-BEKOTEC-THERM assembly is lighter than traditional screed installations and saves considerable construction time. Vitally, no commissioning of the system is required before tiles are installed; dependent upon the system and screed used, the commissioning process can take up to several weeks, so time savings in this area are greatly appreciated on-site.

Schlüter®-BEKOTEC-THERM can be easily integrated into an existing heating system to provide underfloor heating for some rooms and radiators for others, but can also be used cost-effectively across an entire building. Another major advantage is that it can also be used to cool the floor down in the summer, either via passive cooling of the unheated water or by pumping water chilled to around 18 to 19°C through the pipes.

Mobirise

In addition to tile and stone, the Schlüter®-BEKOTEC-THERM system can be used with other coverings, including timber, carpet, vinyl and parquet, to name but a few.

Approved installations for peace of mind
What makes Schlüter®-BEKOTEC-THERM really stand out from the crowd is its covering and assembly warranty, which can be extended if installed by a member of the Schlüter Approved Installer Network (SAIN).

Schlüter Approved Installer Network members have completed full training with Schlüter. The network not only gives accreditation to the individual, but also to the company as a certified organisation. This provides reassurance to you, as the specifier or architect, that the system will be installed to the manufacturer’s standards and best practice, and minimises installation risks; ensuring a robust, reliable installation.

Learn more about specifying underfloor heating
The CPD seminar ‘Specifying Integrated Underfloor Heating Systems’ covers the key considerations in the specification of a modular underfloor heating system that helps to protect tile and natural stone floor coverings from cracking, splitting, tenting and debonding, and explores the theory behind modular screed systems. Enhance and reaffirm your knowledge with this 45 to 60 minute presentation, held at your offices.

To book a CPD Seminar, call 01530 813396, email training@schluter.co.uk, or visit www.trainedwithschluter.co.uk.

FREE SUBSCRIPTION FORM

(UK RESIDENTS ONLY)

OUTLINE FIELDS are required.

Please provide your job title and any other comments in the message box.

Address

Unit 1, The Old Dairy
Great Danegate
Eridge
East Sussex
TN3 9HU

Contacts

Email: john.passmore@kick-startpublishing.co.uk                     
Phone: 01892 752400